CONSTANT VELOCITY JOINT (CV) BOOT/DRIVESHAFT/HALFSHAFT BOOT

THIS PART IS NOT AVAILABLE FROM ASTON MARTIN - IF YOU HAVE A SPLIT BOOT THE ONLY OFFICIAL OPTION IS A NEW DRIVESHAFT.

WE HAVE SOURCED THESE HIGH QUALITY UK MADE BOOTS, THEY ARE THE STRETCH TYPE WHICH SAVES DISMANTLING THE CV JOINTS FROM THE DRIVESHAFT, YOU NEED A CV BOOT FITTING CONE, ESSENTIALLY YOU LUBRICATE THE BOOT AND SLIDE IT OVER THE CONE AND ONTO THE DRIVE SHAFT. COMES WITH A SACHET OF THE CORRECT GREASE AND NEW CLIPS, NOT THE FITTING CONE!

SUPPLIED SINGLY THIS FITS INNER OR OUTER JOINTS FROM EITHER SIDE OF THE CAR.

THIS IS SPECIFICALLY FOR DRIVESHAFTS THAT PUSH INTO THE DIFFERENTIAL, IF YOU WISH TO DOUBLE CHECK, THIS REPLACES BOOTS THAT MEASURE APPROX 38MM AND 68MM OVER THE FITTING CLIPS.
FOR DRIVESHAFTS THAT BOLT ONTO A FLANGE AT THE DIFFERENTIAL SEE https://www.astonmartinbits.com/models/5-V8-Vantage/parts/8716.

FITS ALL YEARS AND VERSIONS - EXCEPT FOR VANTAGE WHERE IT IS USED ON 7 SPEED CARS ONLY SO IT FITS V8 AND V12 VANTAGE 'S' MODELS, GT12, GT8 BUT NOT 6 SPEED V8 OR V12 VANTAGE FOR THESE MODELS SEE OUR LISTING https://www.astonmartinbits.com/models/5-V8-Vantage/parts/8716

** IN STOCK READY FOR IMMEDIATE DISPATCH **